| |
| Food industry |
 |
The conveyor illustrated was designed to 'link
together' process machinery in a bakery and was fitted with small
diameter end transfer rollers to provide the best product support
in those areas.
Some of the features included:
- 'Lift up' end assembly for quick belt de-tensioning.
- Combined drive & tension unit for a
fixed length conveyor.
- Full mesh underguarding.
- Belt scraper.
|
|
| |
| |
| |
| Food industry |
 |
Another link conveyor in a bakery, this time
to provide an 'either/ or' function, which allows the operators
to bring product down one of two lines.
Some of the features include.
- 'Lift up' end assembly, without the need
to detension the belt.
- Small diameter nose rollers allow product
to transfer without tipping.
|
|
| |
| |
| |
| Food industry |
|
This freezer infeed conveyor was designed
to allow multiple small diameter 'butter pats' to be deposited/
formed on the belt and then transfered on to freezer on a regular
index.
Some of the features include:
- Fully adjustable heavy duty bed section
under depositing area.
- Tight 'bull nose' end transfer to allow
product to peel off onto the freezer.
- Combined drive & tension unit for fixed
length conveyor.
- Belt scraper and catch tray.
|
 |
|
| |
| |
| |
| Heavy duty for the Automotive industry |
 |
The conveyors illustrated were designed to
'handle' pressed mild steel car body components dropping out of
a press.
Some of the features include:
|
|
- Heavy duty steel
laced belt designed to withstand the impact/ sharp edges of
cut steel components dropping out of a press.
- Hand cranked hydraulic
cylinders to rise & lower the conveyor infeed end.
- Powder coated mild
steel construction, most colours available.
- Modular construction
for ease of installation.
- Heavy duty construction
for fork lift truck 'moving & positioning'.
|
 |
|
| |
| |
| |
| Heavy duty for the Automotive industry |
|
|
- Hand cranked hydraulic
cylinders to rise & lower the discharge end.
- Fork lift tines and large
heavy duty castors for ease of positioning.
- Heavy duty endless belt
designed to withstand the impact/ Sharp edges of cut steel components
being loaded/ unloaded.
|
 |
These conveyors are
also available in a double lift configuration for fully adjustable
infeed and discharge heights. |
|
- Hand cranked from a single
unit with lever designation of infeed or discharge end.
|
| This is one of our double
end lift units next to one of our works vehicles, as you can see,
the conveyors are ideal for large body panel pressings. |
 |
|
| |
| |
| |
| Heavy duty for the rail industry |
 |
This conveyor was designed to handle brake
shoes and sit in a pit, between the rails of a maintenance depot,
allowing trains to pass over it when not in use. |
|
some of the features
include:
- Heavy duty belt.
- One touch pneumatic
lift.
- Full weld mesh
guarding.
|
 |
|
| |
| |
| |
